

Power Electronics will showcase its AIPCS platform with three configurations: FreeQon, FreePuls, and AIPCS 800PS, at RE+ 2026
FreeQon supports uninterrupted and high-quality power supply to AI workloads while isolating the grid during rapidly fluctuating AI computing loads
The FreePuls smooths the peak AI load curve, while the AIPCS 800 PS provides 800 V DC to GPU racks by directly converting MV AC to DC
Power Electronics S.L., a Spain-headquartered company that manufactures PV and hybrid inverters and recently entered the AI data center (AIDC) space, will showcase its product lineup at RE+ 2026.
The company will highlight its latest AIPCS platform, including a power conversion system (PCS), a PCS controller, a direct MV AC-to-LV DC power distribution solution, and a DC/DC converter, targeting the AIDC segment.
The company calls its PCS product AIPCSM, which is IEC- and UL-certified. The FP5231MH series is IEC-certified and is a 5,230 MW bidirectional converter designed to connect a battery energy storage system (BESS) to the grid at 33 kV AC. It is rated for a maximum DC system voltage of 1,500 V, with a corresponding range of 976 to 1,500 V. It measures 7,150 × 2,000 × 2,200 mm (W × D × H), uses forced-air cooling, and has an IP55 rating. The product datasheet says it includes an MV transformer and switchgear on a single platform and specifies a rated maximum conversion efficiency of 98% (system level). In dynamic AIDC computing load environments, it is engineered to withstand up to 110% overload for up to 15 seconds. This duration is reduced to 8 and 5 seconds when the overload reaches 120% and 150%, respectively. It drops further to 100 ms at 166% overload.
The AIPCS platform, using the PCS, offers two configurations, depending on AIDC load patterns, grid constraints, and electrical distribution architectures. The FreeQon places AIPCSMs on both sides: one facing the GPU or AI workload and the other connected to the 33 kV grid. In the event of rapid AI and GPU workload variations, Power Electronics’ AIPCSController, which continuously monitors power at the point of interconnection (33 kV) and optimizes battery state of charge (SOC), activates the system. During this phase, the grid-side PCS rapidly charges the storage, while the workload-side PCS simultaneously discharges to supply the AI workloads, instead of drawing power directly from the grid. This double-conversion power system isolates the grid from the rapid load variations and helps maintain uninterrupted power quality to AI workloads.
In comparison, the FreePuls configuration puts its AIPCSM between the BESS, the grid, and AI workloads. It has two operating modes: FreePuls GFL and FreePuls GFM. The former is a grid-following solution suitable for strong grid environments. When activated, it injects stored energy into the AI workloads and smooths the peak load curve, helping optimize costly grid power consumption. It has a response time of <5 ms.
The FreePuls GFM is a grid-forming BESS solution for weak-grid scenarios. It forms its own voltage and frequency to enhance power system stability or ensure transition to islanded mode for uninterrupted operation during grid outages or disturbances.
This platform also includes AIPCS 800PS, a power distribution system that converts MV AC power supply to 800 V DC for AI workloads or GPU racks directly, without any intermediate conversion steps. Measuring 6,500 × 2,000 × 2,200 mm (W × D × H), it has a rated conversion capacity of up to 3.820 MW, with a corresponding operating voltage of 34.5 kV AC and a maximum DC voltage of 1,000 V. The product datasheet specifies a maximum conversion efficiency of 98%.