

Solar-LIT showcased its 1P Automatic Cleaning Robot at REI 2026
This robot supports PV module installations with up to 60° tilt and can travel across a twisted angle of up to ±45°, a maximum terrain slope of 30° without cleaning interruption
The product datasheet lists its nominal travel speed at 18±2 m/min and a maximum dust cleaning efficiency of ≥99.5%
Xiamen Lanxu Intelligent Technology Co., Ltd. (Solar-LIT) showcased its rail-mounted 1P Automatic Cleaning Robot at REI 2026, targeting dry cleaning in utility PV installations over undulating terrain.
This modular product mounts a soft, elastic brush over a rail structure covered by a white housing. This narrow robot matches the module length when mounted across a portrait-oriented PV module array.
With built-in motors and sensors, this self-powered (portable PV module) robot navigates its intended travel path with a rotating brush, while removing dirt, dust, and debris from module surfaces without using water. According to the company, this brush doesn’t damage the module surface during dry cleaning.
The robot supports both tracker and fixed-tilt PV module installation with a maximum inclination angle of 60° relative to the horizontal ground level. While traveling at 18±2 m/min, it can negotiate a twisted mounting structure within a ±45° angle range without disrupting cleaning. It can also climb or descend slopes up to 30° on undulating terrain while negotiating obstacles at module crossings. The product datasheet says it can cross up to 75 mm vertical and 50 mm horizontal obstacles. It has an IP65 rating and an anti-corrosion rating of ≥C4.
The company claims this robot can achieve a dust-cleaning efficiency of ≥99.5%, depending on site and testing conditions.