HiTHIUM Unveils Integrated C&I Microgrid Solution At RE+ 2026

The company also showcased its 6.9+ MWh LDES and 4 MWh sodium-ion ESS
HiTHIUM’s product showcase at RE+ 2026 covered microgrid applications, long-duration energy storage, and sodium-ion battery technology.
HiTHIUM’s product showcase at RE+ 2026 covered microgrid applications, long-duration energy storage, and sodium-ion battery technology. (Image Credit: HiTHIUM)
Published on: 
Key Takeaways
  • HiTHIUM has introduced its first integrated C&I microgrid solution, built around a 1,022 kWh liquid-cooled battery energy storage system

  • The microgrid supports peak shaving, load shifting, and backup power supply

  • Other products on display included a 6.9+ MWh 8-hour BESS and a 4 MWh sodium-ion ESS

Battery energy storage manufacturer HiTHIUM has unveiled its first integrated microgrid solution for commercial and industrial (C&I) applications at RE+ 2026. The company also showcased its long-duration and sodium-ion battery energy storage technologies at the exhibition.

At the core of the microgrid solution is HiTHIUM’s ∞Power liquid-cooled DC battery energy storage system (BESS), with a rated energy capacity of 1,022 kWh per cabinet. The cabinet uses the company’s in-house-developed 1,175 Ah lithium iron phosphate (LFP) cells. According to its product specifications, it supports 4 hours of storage at a charge/discharge rate of 0.25P and offers a round-trip efficiency of approximately 90%.

The cabinet occupies 3.4 m², corresponding to an energy density of around 300 kWh/m². According to HiTHIUM, this represents a 32% reduction in footprint compared to four 261 kWh cabinets. It features an IP55 protection rating, C5M corrosion protection, and an aerosol-based fire suppression system.

For microgrid applications, HiTHIUM combines the battery energy storage system with a grid-forming power conversion system (PCS), on-grid/off-grid switching equipment, and a microgrid controller. The solution also supports integrating on-site solar PV and backup generators, depending on project requirements.

During grid-connected operation, the system can store surplus solar power or charge batteries during off-peak hours and discharge during peak hours. This helps facilities reduce peak grid demand and electricity costs. The energy management system can also reserve a portion of the battery capacity to supply critical equipment during power outages.

At the exhibition, HiTHIUM showcased the microgrid’s backup power capabilities by simulating a power outage at a cold storage facility. In the simulation, the system continued to power the refrigeration equipment while adjusting electric vehicle (EV) charging based on available power.

Depending on the facility’s energy needs and required backup duration, HiTHIUM can customize the system’s power and storage capacity.

Among the other products on display was HiTHIUM’s ∞Power 6.9+ MWh long-duration energy storage (LDES) system. The 8-hour LDES uses the company’s 1,300+ Ah battery cells and comes in a standard 20-ft container. It has a design service life of 25 years and a DC round-trip efficiency of at least 96%. Compared to a 5 MWh configuration, it requires 27% fewer containers and reduces peak auxiliary power consumption by 68%, according to HiTHIUM (see HiTHIUM’s Latest 8-Hour BESS For AIDC Applications).

HiTHIUM also showcased its ∞Power N4.0 MWh sodium-ion energy storage system (ESS). It uses the company’s in-house-developed 785 Ah sodium-ion cells, which offer a life of up to 20,000 cycles. The ESS has a design service life of 30 years.

For artificial intelligence data centers (AIDCs), HiTHIUM presented an integrated energy storage solution that combines battery containers, PCS, power plant controllers (PPCs) and energy management systems (EMS). Its portfolio covers LFP-based storage configurations for 2, 4, and 8 hours, as well as sodium-ion storage configurations exceeding 2 hours (see HiTHIUM Unveils 4 MWh Sodium-Ion Storage System).