Cell Connection Equipment For Shingling PV Modules
German Based M10 Solar Equipment Along With Fraunhofer ISE Developed Shingle Matrix Interconnection Technology For Solar Module Makers
M10, a German module production equipment supplier, has developed an innovative interconnection system for producing shingled solar modules.
Patent Settlement For Solaria & Canadian Solar
No Canadian Solar Shingled Solar PV Modules Into US For Next 7 Years
American solar cell and module manufacturer Solaria Corporation has agreed to terminate its patent infringement case against its Canadian counterpart Canadian Solar in lieu of the latter not importing shingled solar modules into the US for the next 7 years.
New Stringer For Shingle Modules
Matrix Shingle Technology From Fraunhofer ISE & M10 Industries
German solar energy research institute Fraunhofer Institute for Solar Energy (ISE) and its industrial partner M10 Industries AG have developed a new stringer to manufacture ‘novel’ matrix shingle modules, using a matrix shingle concept to connect.
Seamless Encapsulation For Higher Efficiency
LONGi Solar To Start Mass Production Of Seamless Soldering Technology In H2/2019 As It Leads To PERC Module Power Generation Of 500-Watt, According To TÜV SÜD
LONGi Solar’s seamless soldering technology (commonly known as shingle modules) helps completely eliminate the typical 2 mm wide cell gap between cells which reduces the module BOM cost.
So Many Advanced Solar Module Technologies
There Are Plenty Of Advanced Module Technologies Now Commercially Available, As Shown in A New TaiyangNews Report. But What’s The Way To Go?
Comparing the best commercial advanced modules of leading suppliers in our new TaiyangNews report, there is no clear trend regarding technology yet.
