18.2% Efficiency For Large Size Perovskite Solar Module

Wuxi UtmoLight Says 18.2% Large Area Perovskite Solar Module Efficiency Confirmed By Japan’s JET

18.2% Efficiency For Large Size Perovskite Solar Module

UtmoLight is conducting trial runs at its 150 MW perovskite solar module production line currently and preparing to start constructing GW level facility in 2023. (Photo Credit: Wuxi UtmoLight Technology Co, Ltd)

  • Wuxi UtmoLight has achieved 18.2% efficiency for its perovskite solar module over a large area of 756 cm²
  • This JET certified efficiency is an improvement over the same efficiency it reported for a perovskite module having 300 cm² area in April 2022
  • It is a promising result, paving the way for mass production of perovskite solar modules, the company stated

Chinese perovskite solar PV company Wuxi UtmoLight Technology has announced achieving 18.2% power conversion efficiency for an in-house developed large-scale perovskite solar module with an area of 756 cm².

UtmoLight calls this a breakthrough in large size perovskite module technology after having reported the same 18.2% efficiency for a smaller size module with 300 cm² dimension in April 2022. This shows the module can maintain a high conversion efficiency despite the enlargement of the module area. Mass production of this technology is now becoming mature, it added.

The measurement was confirmed after testing by the Japan Electrical Safety & Environment Technology Laboratories (JET) in September 2022.

UtmoLight says its perovskite modules use in-situ solid film, methylamine-free material, interface passivation and defect control technology that help ‘breakthrough the industry pain points of the perovskite industry’ in terms of efficiency improvement. It also clears obstacles for the commercial mass production of perovskite.

“Among them, the “in-situ solid film” process solves the pain point of large-scale mass production technology from the film formation mechanism. The innovative process has a wide window and is easy to achieve large-scale crystallization control,” stated the company. “The prepared perovskite film is oriented and crystallized with larger grain size and fewer defects, ensuring that high quality can still be obtained while the process area is enlarged.”

The Chinese company is currently running trial production on its 150 MW module production line, which it says is the ‘world’s largest’ for perovskite solar.  It now is prepping to start construction on the ‘world’s 1st’ GW level perovskite production line in Wuxi, in early 2023.

Back in April 2021, the company achieved 20.5% efficiency for its mini perovskite solar module with a designated area of 63.98 cm² and claimed it to be the highest record efficiency generated by a perovskite solar module globally (see 20.5% ‘Record’ Efficiency For Perovskite Module).

About The Author

Anu Bhambhani

Anu Bhambhani is the Senior News Editor of TaiyangNews. Anu is our solar news whirlwind. At TaiyangNews she covers everything that is of importance in the world of solar power.

Subscribe To Newsletter

Register for the upcoming event

Latest Videos


Subscribe To Our Taiyang NewsLetter 
Enter your email to receive our daily solar sector updates.