Huasun’s G10 Heterojunction Solar Module
China’s Huasun Says PV Industry Enters HJT 3.0 Era With Its G10 Sized Heterojunction Solar Panels
Heterojunction (HJT) solar PV manufacturer from China Huasun has launched a new solar module with G10 configuration of 182mm wafer sized cells, different from M10, and uses microcrystalline thin-film layer on both sides, replacing the doped amorphous.
Sharp Launches New PERC Solar Panels
Sharp Energy Solutions Europe Adds 410W & 400W Half-Cut Cell Modules To Portfolio
Targeting residential, small-scale commercial and industrial rooftop solar installations, Sharp Energy Solutions Europe has launched 2 new PERC solar PV panels with 410W and 400W output based on 182mm wafer sized cells, and expanded its existing half-cut cells portfolio.
Trio Release M10 Module Standardization
182mm Wafer Sized Solar Module Proponents JA Solar, JinkoSolar & LONGi Solar Agree On & Release Standardization Scheme For M10 Modules
JA Solar, JinkoSolar & LONGi Solar, the 3 Chinese solar PV product manufacturers putting their weight behind 182mm wafer sized solar module design have come up with a standardization scheme to jointly advocate this wafer size to smoothen supply chain challenges.
JA, Jinko & LONGi White Paper Backing 182 mm Modules
JA Solar, JinkoSolar And Longi Solar Jointly Published A White Paper On Achieving Lower LCOE With Optimal Module Solution In Utility Applications
Three leading vertically integrated companies – JA Solar, JinkoSolar and LONGi – which has been the main supporters and promoter of modules based on M10 wafer format have jointly published a white paper with a title “Optimal Module Solution.
Rodina Signs 2 GW Module & Trackers Deal
Ukraine Based Solar EPC Company Rodina Energy Group To Source 1 GW Modules From Seraphim Solar & 1 GW Trackers From Arctech Solar
Eyeing its international markets, Ukraine based solar EPC and O&M service provider Rodina Energy Group has secured a large volume of Chinese solar modules and trackers with a combined capacity of 2 GW at the recently concluded SNEC 2021.
Very High-Power Solar Modules Report 2021
TaiyangNews Report on Very High-Power Modules 2021 Summarizes Most Notable Developments Along Manufacturing And PV Value Chain for Panels Based on Large Wafers & Provides Overview on Latest Products of Leading Module Suppliers
Nothing grabs as much attention as the word “Power” in the realm of PV.
Bigger Is Not Always Better
Longi Solar Provided An Extensive Comparison Of 182 Mm Wafer With 210 Mm From A Manufacturing Point Of View AT Taiyangnews High Efficiency Conference
The advantages of module products based on M10 (182 mm) wafers was the topic on the first day of the TaiyangNews Virtual Conference on High Efficiency Solar Technologies held on Dec 1, 2020.
M10 Module Benefits Along the Value Chain
JA Solar Presented Manufacturing Intricacies of 182mm/M10 Wafers Over 166mm/M6 Wafers Along Manufacturing Chain Starting From Ingot Growing At TaiyangNews Conference
Building modules based on larger wafer formats in pursuit of the higher power is one of the most important developments in PV industry in the recent time.
182mm Sized Module From JinkoSolar For DG Market
JinkoSolar Launches New ‘Ultra-Efficient’ Tiger Pro Solar Modules With 182mm Size & 415W Power Output For Distributed Generation Market
China’s JinkoSolar Holding Co., Ltd. has launched a new series of modules targeting the distributed generation market, part of its Tiger Pro modules.
Cost Reduction Through Larger Wafers
The Main Motivation For Increasing Module Power Through Larger Wafers Is To Reduce The Cost For The Balance Of System (BOS).
Th PV industry has increasingly been focusing on employing larger wafer based cells in pursuit of increasing module power. The main motivation for increasing module power is to reduce the cost for the balance of system (BOS).
The M10 Perspective
The Day 1 Of TaiyangNews’ Virtual Conference On High Efficiency Solar Technologies Discussed Advantages Of M10-Based Modules Along The Manufacturing Chain
In the past, module manufacturers mostly relied on cell level performance to improve module output power. This led to PERC finding a footing a few years ago to now establishing itself as the state-of-the-art cell technology.
Vikram Solar Launches 505W Solar Modules
Indian Solar Panel Maker Vikram Solar Introduces Series 6 Solar Modules Using 166mm Cells With 505W Power Output; Reserves 120-Cell Variant Only For US & Global Markets
Vikram Solar of India has launched a new solar module series calling it Series 6 with a power output of 505W based on M6 or 166mm wafer format and said these to have between 18.34% to 21.02% efficiency.
China PV News Snippets: ZShine, Sungrow, ReneSola, Datang
Znshine Solar Delivers 182mm Solar Module To Vietnam; Sungrow’s Surface PV System In Vietnam Completed; Renesola’s 10 Rooftop Projects Receive Renewable Energy Subsidies; Datang Group And Guangdong Province Sign Strategic Agreement
An order for ZNShine’s 182mm modules, which adopts double glass frame design, has been successfully shipped to Vietnam. This is the Chinese company’s first 182mm module order.
Seraphim Launches New Half-Cell Solar Modules
Another High Efficiency Solar Module With 182mm Sized Wafers Launched; Jiangsu Seraphim To Aim For Around 3 GW Annual Production Capacity For S4 Half-Cell Module
Jiangsu Seraphim Solar System Co., Ltd. has launched a new solar module product calling it S4 half-cell series.
3 PV Giants Unite To Push 182mm Cell based Modules
JA Solar, JinkoSolar & LONGi Push For 182mm Sized Solar Modules In A Conference Claiming Their Joint Production Capacity For Such Modules By 2021 Would Reach 54 GW
Three leading solar PV module manufacturers from China—JA Solar, JinkoSolar and LONGi Green Energy, —came together to organize a conference to discuss application of ‘182mm’ high efficiency solar module technology with the aim to make it the industry’s mainstream size.
